SCSI2Pi 6.2.3 is available.
The most important changes in this version:
- Fixed bug when evaluating extended SCSI messages.
- In initiator mode, an error is reported when sending CDBs < 6 bytes.
SCSI2Pi profits from running on a full-fledged Linux. Specially configured SD cards are not required, because images are simply copied to the Pi via the network. You control it with the SCSI Control App, a web interface or on the command line. Ataris are especially well supported with the SCSI2Pi Client Tools. SCSI2Pi is regularly used and tested with Atari computers.
Visit the SCSI2Pi website for highly optimized 32/64 bit Bullseye/Bookworm/Trixie binary Debian packages.
Debian support for Bullseye will end on August 31, 2026. Upgrading to Trixie is recommended.